Product Introduction:Our fully automatic plate sealer adopts a roller pressure design, providing tight sealing without liquid leakage, effectively preventing sample loss and cross-contamination. It is mainlyused for PCR plate sealing. The instrument is simple to operate, with flexible software parameter settings and fast, easy sealing process, greatly improving work efficiency.Product Features:The sealing process is fast and efficient, with a sealing cycle as short as 15 seconds, and single-step sealing can be completed in as fast as 3 seconds. Consumable replacement is convenient - after heat sealing, the plate sealing film is cut and leaves a small edge, making bottom film recycling very convenient.Can be used as a standalone unit or integrated into other automated workstation platforms;Interfaces: Supports USB, RS232, RS485 interfaces, and can also be controlled via TTL signals.One-button sealing, compatible with various PCR 96-well plates;Adapters are convenient to replace and can also be customized according to experimental requirements;Tight sealing: Adheres to the plate through dual action of pressure and heating, providing high sealing degree; No evaporation: Meets the need for preventing evaporation in gene amplification experiments; Excellent consistency and repeatability: The equipment supports flexible sealing time settings from 1 to 10 seconds, temperature control accuracy up to ±1°C, and automatically recognizes sealing height, ensuring stable and uniform sealing results.Technical Parameters:Product NameFully Automatic Plate SealerModelBC001Sealing MethodPressure SealingCompatible Film TypeRoll Pressure-Sensitive FilmCompatible Film ModelBC-RTQ-RLCompatible Film Specification150 sheets/rollCompatible Consumable Type96-well PCR plate (no skirt, semi-skirt, full skirt)Operation InterfaceButton operation or external LCD touchscreenSealing Time8 secondsSignal InterfaceCompatible with USB or RS232, RS485 interfaces, also controllable via TTL signalsRated Power200WProduct Dimensions240×405×412mm(L×W×H)Net Weight18.5kg Operating Steps:Starting the Equipment:According to the instructions in the equipment operation manual, correctly connect the equipment power supply.Turn on the equipment power switch and wait for the equipment self-check to complete.The emergency stop button popping up is the initial state. For first-time startup, press the reset button once - the plate feeding fixture will automatically return to the initial position, and the film feeding axis will rotate for one film length. Please remove the peeled film at this time to prevent it from being drawn into the pressure roller. After the above two actions stop, you can place the multi-well plate and press the start button - the multi-well plate will be automatically sealed and return to the initial position. Without pressing the emergency stop, there is no need to press the reset button again. After loading, directly press the start button, and the equipment will automatically complete the sealing action and return to the initial position.Parameter Settings:According to actual needs, set equipment parameters through the operation panel or software interface (for models with HMI screen).After confirming the parameter settings are correct, save and apply.Starting Operation:According to the instructions in the equipment operation manual, start the equipment to begin work.During operation, observe the equipment running status and indicator light changes.Film Count Writing:For models without HMI screen, film count writing method: 1. Press the emergency stop button; 2. Press the reset button and start button simultaneously and hold for more than 2 seconds, the parameter will automatically write 150 sheets per roll.Release the buttons, turn the emergency stop button to pop up, then press the reset button once. All equipment components will automatically find the home position. Note: When the film axis resets, please manually remove the peeled film.All components return to initial position, ready to start sealing.Monitoring and Adjustment:During equipment operation, regularly monitor equipment status and output results.If parameter adjustment is needed, please operate according to the equipment operation manual.If film jam or equipment abnormality occurs during operation, please press the emergency stop button directly, and the equipment will stop running immediately.Ending Operation:After the equipment completes its work task, shut down the equipment according to the instructions in the equipment operation manual.Disconnect the equipment power supply and clean the surrounding environment of the equipment.PrecautionsSafety Operation: When operating the equipment, please strictly follow the safety regulations in the equipment operation manual. During equipment operation, do not put your hands or foreign objects into the rotating shaft to avoid crushing injuries, equipment damage, or other accidents.Maintenance: Perform regular maintenance on the

jiangying@sh-biochem.com